FC Forum : Sam L. Morse Forums
News, views and discussion on the Lyle Hess designed Sam L. Morse Falmouth Cutter
Goto Thread: PreviousNext
Goto: Forum ListMessage ListNew TopicSearchLog In
Watch Seat/ Storage Box
Posted by: mav5252 (IP Logged)
Date: May 25, 2013 01:02AM
Category: Accessories

Hi Skippers, This is Mike Anderson, owner of "Tansy Lee" and AndersonBoatworks.com.

Thanks for the nice responses regarding last months project, the Belaying Pins, I've been busy filling orders for a few of you.

This months feature project is a Watch Seat. Ken Banks owner of BCC hull #114 - "Solimar," commissioned me to build this Companionway Watch Seat / Storage Box to his design. I've built watch seats before but this was the first that incorporated a large storage area that would rest on the bridge deck fully cushioned.

It is wedge cleated into the bottom of the drop board holders making it rigidly solid yet fast and easy to remove.There's no need for hardware or barrel bolts...none required!. It has a shelf inside and is padded from the deck by 1/4" mushroom shaped gasket let into the bottom ends and other areas... so no chafe here at all.

This removable seat / box measures 13/16 this thick seat with the width of the companionway and 8-10 inches deep, with no overhang inboard. There's plenty of room for items like handheld radio, binoculars, GPS, folded charts, gloves, sheet winch handles, gasket lines, water bottles, food , etc. See attachment.

This accessory can be built for the Falmouth Cutter and other boats having a bridge deck as well. Nothing wrong with a comfortable watch seat and easy reach for stowed gear to make sailing easier.

E-mail me for more specifics or just let me know what you think,

Mike ...Mav5252@aol.com




Attachments: Watch Seat : storage Box.jpeg (312kB)  


Sorry, only registered users may post in this forum.
copyright Coledata, Inc. 2008