FC Forum : Sam L. Morse Forums
News, views and discussion on the Lyle Hess designed Sam L. Morse Falmouth Cutter
Goto Thread: PreviousNext
Goto: Forum ListMessage ListNew TopicSearchLog In
Anchor retension
Posted by: Stout (IP Logged)
Date: May 22, 2013 11:50PM
Category:

Hey. I don't have a windlass and currently am running a shackle to my chain with a line around the bits to keep it tensioned. It's a bit awkward and sometimes interferes taking off the docklines. Does anyone have a more elegant solution?

Re: Anchor retension
Posted by: barefootnavigator (IP Logged)
Date: May 27, 2013 01:32AM
Category:

I use a simple anchor hook attached by a short line around my Sampson post to a small cleat on my bowsprite. I have a Rocna anchor that lives on my bob stay. When I get close to an anchorage I loosen the line about 2 inches, when I'm ready to drop the hook I can pull the anchor chain tight, un-hook the chain hook and let her go, the whole process is easy and takes about 2 seconds. When I purchased the boat she had 200' of 5/16 chain and a beautiful bronze windlass, about 300' total on the bow, way too much for my little girl.

s/v Sookie
FC #26
www.artofhookie.org

Re: Anchor retension
Posted by: Stout (IP Logged)
Date: May 30, 2013 02:01AM
Category:

Thats a good idea. Another FC captain told me about a cleat on the sprit too. Its seems pretty simple. Thanks.



Sorry, only registered users may post in this forum.
copyright Coledata, Inc. 2008