BCC Forum : Sam L. Morse Forums
News, views and discussions on Lyle Hess Yachts, focussed primarily on the Bristol Channel Cutter
Goto Thread: PreviousNext
Goto: Forum ListMessage ListNew TopicSearchLog In
Lifeline Stanchions
Posted by: mike (IP Logged)
Date: October 21, 2016 04:36PM
Category: Deck Hardware

Im looking to replace three lifeline stanchions and wonder if anyone has spares available. Im looking for lifeline stanchions for single lifelines, made of stainless steel 1 diameter tube, and having a 5 degree angle on the base plates. I need one single stanchion 26 inches tall, one gate post style stanchion for the port side at 26 inches tall, and the forward most stanchion for the starboard side at 19 tall. Pictures are attached of what I need. The left stanchion in the picture is of the port side gate stanchion. The right stanchion in the picture is of the single stanchion. The starboard side forward most stanchion is similar in shape to the gate stanchion pictured, but is 19 inches tall instead of 26 inches.

Thanks, Mike

Attachments: StanchionPicture.jpg (99kB)  
Re: Lifeline Stanchions
Posted by: Dioscouri (IP Logged)
Date: October 22, 2016 03:04AM
Category: Deck Hardware

I'm assuming you need the replacements because yours are bent? I have what I think are the same stanchions that I no longer need. Mine are from a 1983 Sam L Morse built BCC. I am in the process of replacing them with bronze stanchions. Might be best if you send me a private message at dioscouri@hotmail.com.

Gary

Re: Lifeline Stanchions
Posted by: mike (IP Logged)
Date: October 22, 2016 02:55PM
Category: Deck Hardware

Thanks Gary. E-mail sent.

Mike

Re: Lifeline Stanchions
Posted by: Dioscouri (IP Logged)
Date: October 26, 2016 03:01AM
Category: Deck Hardware

Mike

Did you in fact send an email to dioscouri@hotmail.com. If so, I did not receive it.
Gary



Sorry, only registered users may post in this forum.
copyright Coledata, Inc. 2008